|
To meet the specific needs of the demanding building industry FLIR Systems has
teamed up with professional and experienced building inspectors and has
developed the ThermaCAM B2. The result is an extremely affordable infrared
camera, which has the features that are indispensable when doing infrared
building inspections, and the necessary software to make professional inspection
reports.
Powerful
features especially
developed for
the
Building
Industry
-
Automatic Dew Point Identification Alarm -
In the camera, on-site, no software needed
-
Sound and Colour Alarms
-
Laser
LOCATIR™
-
Calibrated for the Building Industry
(-20 °C up to
+55 °C)
ThermaCAM - B2 Features
|
Precision Temperature Measurement Extraordinary Image Quality
The ThermaCAM B2 delivers unmatched
temperature measurement accuracy. The result is a thermal
sensitivity of 0.10°C and clear noise-free images. A low thermal
sensitivity not only offers you the possibility to see the smallest
of temperature changes, it also means that you get a clear,
noise-free, excellent quality image which can not be obtained by
less sensitive cameras. Thanks to these very detailed images, which
are displayed on the camera’s 2.5” colour LCD, you will clearly see
the smallest temperature changes in a building.
Smart Power Management
No need to worry about batteries
dying and losing valuable inspection time. The lightweight,
long-life Li-Ion battery ensures uninterrupted inspections. It runs
up to 2 hours and the ThermaCAM B2 features an internal battery
charger. A 2-battery charging system and a car/truck charger
adapter, so that you can charge to camera on the way to your next
job, are optionally available.
ThermaCAM QuickView™ Basic Reporting Software Included
The ThermaCAM B2 comes with the
ThermaCAM QuickView software included. This allows you to do basic
post-analysis of your captured IR images and to make simple reports
in a PDF-format.
Software: Useful Packages, Designed For The Building Industry
ThermaCAM Reporter Software -
Full radiometric images, captured by the ThermaCAM B4 can easily be
incorporated in the new Microsoft Word based package. You can
make professional reports which you can present to your clients,
architects etc immediately.
ThermaCAM Image Builder -
Developed on request of the building industry, this package is an
image assembling software that lets you create a large, composite
infrared image out of many small images.
|
|
Locate And Analyse Problems Fast
Analyse problems and share results
with your colleagues in the field. Movable crosshairs allow you to
measure and analyse the temperature at a single point. Find the
hottest spot in a defined area, highlight areas of concern with
colour or sound alarms. The ThermaCAM B2 has all the analysis tools
you need to make instant building decisions in the field.
Flexible Standard Jpeg Image Storage
The camera stores up to 200 infrared
pictures in standard, low density JPEG format, giving you instant
visibility of the images stored in the field.
Easy Operation
At the touch of a button you can
easily change colour palettes, emissivity settings, temperature
ranges and other analysis tools. Built-in menu systems provide easy
access to advanced yet simple to use software.
Adaptable To The Most Challenging Situation Thanks To A Wide
Range Of Accessories
The ThermaCAM B2 is designed with a
built-in 17mm lens, which is suitable for a majority of building
applications. Interchangeable optics offer the building
thermographer the flexibility to adapt his infrared camera to the
most demanding building applications.
Rugged, Ergonomic And Lightweight Useable In All Weather
Conditions
Dust- and splashproof, the B2 meets
IP54. It can be used both indoor and outdoor in the most diverse
weather conditions. Hold the ThermaCAM B2 in your hand. Clip it to
your belt or put it in your toolbox. With a weight of less than 700
grams, the B2 is the lightest infrared camera in the world.
Sound And Colour Alarms
The operator can set a maximum
temperature in the camera. If the B2 is pointed to an object and
this temperature is exceeded, the camera will produce an audible
and/or a visible alarm. |
Technical Specification for the B2 ThermaCAM
|
Imaging Performance
|
|
Field of View / min focus distance
Thermal sensitivity
Image frequency
Focus
Detector type
Optical Resolution (with 36mm Lens)
Spectral range |
Typical 19° x 14° / 0.3m
0.10°C at 30°C
50/60 Hz non interlaced
Manual
Focal Plane Array (FPA), uncooled
microbolometer, 160 x 120 pixels
300:1
7.5
to 13 µm
|
Image Presentation
|
|
Video output
External display |
PAL or NTSC, standard RCA composite video
2.5" colour LCD, 16k colours |
Measurement
|
|
Temperature range
Accuracy
Repeatability
Measurement mode
Menu controls
Set-up controls
Measurement corrections
|
-20°C to +55°C (-4°F to +482°F)
±2°C, ±2%
±1°C, ±1%
1 moveable spot, area max, area min, area
average, dew-point alarm colour and/or sound alarm above or below
Palettes (iron, rainbow, rainbow HC, B&W, B&W
inverse), auto-adjust, (continuous/manual)
Date/time, temperature units °C/°F, language,
scale, info field, LCD intensity (high/normal/low)
Emissivity variable from 0.1 to 1.0, reflected
ambient |
Image Storage
|
|
Type
File formats |
Built-in FLASH memory (up to 200 images)
Standard JPEG |
Lenses (Optional)
|
|
2 x Telescope
0.5 Wide Angle
0.25 Wide Angle |
Typical 9° x 7°/1.2m (with 36mm Lens)
Typical 34° x 25°/0.1 m (with 9mm Lens)
Typical 60° x 45°/0.1m (with 4.5mm Lens) |
Laser Locatir™
|
|
Classification
Type |
Class 2
Semiconductor AIGaInP Diode Laser:1mW/635 nm red |
Battery System
|
|
Type Li-Ion,
Operating time
Display
Charging system
AC operation
Voltage
Power saving |
Rechargeable, field replaceable
2 hours continuous operation
Shows battery status
In camera, AC adapter or 12 V from car (with
optional Std. cable)
2 bay intelligent charger, 12 V
AC adapter 90-260 V AC, 50/60 Hz, 12 V DC out
11-16 V DC
Automatic shutdown and sleep mode (user
selectable) |
Environmental Specification
|
|
Operating temperature range
Storage temperature range
Humidity
Encapsulation
Shock
Vibration |
-15°C to +45°C (+5°F to +113°F)
-40°C to +70°C (-40°F to +158°F)
Operating and storage 20% to 80%, non-condensing
IP54, IEC 359
Operational: 25G, IEC 68-2-29
Operational: 2G, IEC 68-2-6 |
Physical Characteristics |
|
Weight
Size
Tripod Mounting
Cover case |
700g incl. battery (with 17mm lens)
265 mm x 80 mm x 105 mm
1/4" - 20
Plastic and rubber |
Interfaces
|
|
USB
RS-232
cable (optional)
Video output |
Image transfer to PC
Image transfer to PC
Standard RCA composite video |
ThermaCAM E320 includes
|
|
IR Camera, Carrying Case, Power Supply,
Handstrap, Lens Cap, ThermaCAM QuickView Software, USB Cable, User
Manual, Power Cord, Battery |
|
Options and Accessories
|
-
Power Supply
-
12° Lens
-
25° Lens
-
45° Lens
-
Battery
-
Battery Charger
-
DC-12V Connection Cable
-
Hard Transport Case for ThermaCAM® E
Series
-
Holster ThermaCAM® E Series
-
IR HUD- Heads-Up Display Model CV-3
-
Manuals
-
Polarized Sunshield
-
Sunshield
-
ThermaCAM® PC RS232
-
ThermaCAM® Database
-
ThermaCAM® Image Builder-English
-
ThermaCAM® PC USB Cable
-
ThermaCAM® Reporter 7.0™
-
ThermaCAM® Researcher™
-
Tripod
-
Video Cable RCA- RCA
|
|