PHD-130 PCB

The new PHD-130 SXGA ultra low light camera and OEM module. Newly-developed “Day and Night Unit” for PHD-130.

TRADE ONLY

Price on application.

Product Description

If you are building cameras systems for security at critical infrastructures, utilities, airports, government buildings, boarder and costal protection, maritime, airborne, private residential property, force protection, fire-fighting, drivers vision aid, rail, mobile patrols, hunting etc. the PHD-130 2/3CMOS HD 1288×1032 module is ideal for OEM integration to your existing or new camera system.

Benefits

  • 2/3”HD Special CMOS Embedded Imager
  • High Resolution 1288×1032 Detector
  • Two PCB Imager

Specifications

Imaging and optical data:-

A full design document is available to allow interoperability into an existing system, which includes: Sensor signal input, C-MOS level BT1120 out, Power & VBS out, HD-SDI out, BT1120 LVDS out, RS232C / 485, OSD control switch, D/N Auto switch, and Lens DC-IRIS control.

Key Points:-

Optics

C-mount for 2/3” or Bayonet mount (Need a converter adapter to C-mount) available.

The length of the adapter should be less than 9mm

SNR

48dB at minimum, 52dB at standard (AGC-OFF, Enhancer –OFF, Gamma1.0)

2D/3D Noise Reduction

Sensitivity

Minimum: 0.05lux (F1.2/30fps, AGC 30dB)

Minimum: 0.025lux (F1.2 / 30fps, AGC36dB)

Iris

DC-Iris available

Bayonet type (Need a converter adapter to be C-mount)

BLC

ON/OFF

80 point set at maximum

Defog

ON/LOW/MIDDLE/HIGH

White Balance

ATW (Full Auto Tracking) Colour Temp : 2,200°K~9,600°K

AWB (One Push)

Image Output

VBS: NTSC or PAL

Digital : YUV 4.2.2(through LVDS 30pins), HD-SDI (HDcctv spec)

HD 1280 x 720p (30/25fps)

Full-HD 1920 x 1080p (30/25fps)

Full-HD 1920 x 1080i (30/25fps)

Lower power consumption

Input Voltage:DC12V

Consumption current :Approx 350mA

Downloads

Documents on request